Forefront Foodtech Co., Ltd.

จำหน่าย สินค้าและให้บริการที่มีคุณภาพสูง ซึ่งเหมาะสมกับความต้องการของลูกค้า ด้วยความซื่อสัตย์และความตรงต่อเวลา เพื่อการทำธุรกิจที่ประสบความสำเร็จร่วมกันระยะยาว
Detail: - Bodywork: stainless steel - Size: 1141 x 889 x 1069h mm - Chamber size: 1027 x 680 x 230h mm - Weight: 291 kg - Sealing bars: 2x 1007 mm 2x 630 mm - Power grid voltage: 400v 50/60Hz 3ph + PE - Max bag size: variable - Wheelbase short bars: 933 mm - Wheelbase long bars: 586,4 mm Vacuum pump 106 mc/h - Max power absorption: 2500 W Vacuum pump 151 mc/h - Max power absorption: 5100 W Feature: - Digital panel, 48 programs - Double resistance - USB port for firmware update - Absolute vacuum sensor - H2out pump dehumidification program - Counter-bar detachable - Cut of seal - Insert gas supply system - Soft air - Nozzle for jars - Wi-Fi Module - Set of vacuum bags Premium
บริการเครื่องชั่งสำหรับอุตสาหกรรมอาหาร
Detail: - Length : 3815 mm - Width : 1389 mm - Height : 1675 mm - Infeed / feeding height : 1232 mm - Discharge / outfeed height : 933 mm - Total power : 6.4 kW - Voltage : 3~400 VN/PE - Frequency : 50 Hz - Total volume : 814 l - Water discharge : 2x 2" - Fresh water connection : 2x 3/4 (GEKA) - Weight : 560 kg Feature: - Water attached to the wet product is partially eliminated through vibration and returns directly to the machine water circulation. This accelerates and simplifies product drying. - Depending on product, if the vibrating plate perforation has adequate hole sizes, vibration discharge can be used to product pre classification. This way, smaller particles that can fall through the holes are separated, allowing a better end product quality. Some sorting procedures could be simplified.
Detail: - Length : 5073 mm - Width : 1689 mm - Height : 1705 mm - Infeed / feeding height : 1293 mm - Discharge / outfeed height : 956 mm - Total power : 12 kW - Voltage : 3~400 VN/PE - Frequency : 50 Hz - Total volume : 1700 l - Water discharge : 2x 2" - Fresh water connection : 2x 3/4 (GEKA) - Weight : 800 kg Feature: - Water attached to the wet product is partially eliminated through vibration and returns directly to the machine water circulation. This accelerates and simplifies product drying. - Depending on product, if the vibrating plate perforation has adequate hole sizes, vibration discharge can be used to product pre classification. This way, smaller particles that can fall through the holes are separated, allowing a better end product quality. Some sorting procedures could be simplified.
เครื่องปอกว่านหางจระเข้ Nock รุ่น Cortex CB 435/5 ALOEความเร็วสายพาน 24/29 เมตร/นาทีความกว้างสายพายมี 4 รุ่น430, 500, 600, 700 มมตัวเครื่อง สแตนเลสสตีลลูกกลิ้ง บอลลูนความยาวใบมีด 4 รุ่น460, 520, 620, 720 มมเครื่องปอกว่านหางจระเข้ได้รับการออกแบบโดยเฉพาะ สามารถปรับความหนาบางในการปอกว่านได้ หลังจากการปอกแทบไม่มีเนื้อว่านเหลือติดเปลือก ให้ yield เพิ่มขึ้น กำลังการผลิตสูง สามารถช่วยลดค่าแรงได้มาก การใช้งานเครื่องสะดวก สามารถล้างทำความสะอาดง่าย การบำรุงรักษาต่ำ ใช้งานทนทาน
ขนาดใบมีด เครื่องลอกหนังหมู หนังปลา ลอกพังผืด และเครื่องปอกเปลือกว่างหาวจระเข้
Specifications Series C560 Series C460 Cutting width 500 mm Cutting speed 19 m/min blade gap 0-4.5 mm Overall dimension 815*950*600mm Weight 180 kg Cutting width 430 mm Cutting speed 19 m/min blade gap 0-4.5 mm Overall dimension 750*950*600mm Weight 150 kg Feature Series C560 & Series C460 Nock open-top derinding is durable and easy to clean It is suitable foe both flat and round pieces. The machine is on wheels.It is easily transported to use anu where in the factory The machine has extra support plates for durability. Cutting width 430/500 mm
Detail: - cutting width : 500/mm - cutting speed : 29 m/min - maximum throughput height : 120/mm - blade gap : 0-5/mm - apply length on infeed conveyor : 300/mm - overall dimension W x H x D : 865 x 1190 x 1860 mm - infeed conveyor : 850x490 / mm - output conveyor : 850x490 / mm - weight : 265/ kg - motor performance : 1.1 / kW - electrical connection : 3 AC * 400V – 50 Hz² Feature: - Pressure roller : spring-suspended & adjustable in height - Output conveyor - Tooth roller with scraper comb - NOCK POWER PLATES - NOCK EASY-FLOW safety cover - Lockable castors
Detail: - Double needles: 24 - Number of needle heads: 1 - Needle diameter: 4.0 mm - Strokes per minute: 32/64 - Belt advance, adjustable in 6 strokes 15-45 mm - Max. product height: 200 mm - Channel width: 270 mm - Max. capacity per hour: 600-800 kg - Max. injection rate in one pass (impeller pump IP-45): 35% - Needle head drive: 0.63 kW - Brine pump: 0.75 kW - Dimensions (packed): 135 x 80 x 205 mm - Approx. net weight: 204 kg. - Approx. gross weight, with seaworthy crating: 296 kg. Feature: - Rugged, heavy-duty nickel-chromium-steel construction throughout. - 24 continuously spraying, spring-loaded needles (12 double needles) 4.0 mm in four rows, for high injection rates with minimal brine pressure, replaceable without tools. - Two patented pressure-compensation stripper blocks for continuous brine circulation to ensure accurate injection rates and minimize risk of plugged needles. - Infinitely variable relief valve regulates brine pressure of the rust proof impeller pump IP-45, capacity 45 liters/min with separate drive motor 0.75kW, can be disassembled without tools. - Glycerine manometer for pressure gauge display - Suction filter on all intakes with quick-connection couplings and return-flow filter unit with replaceable filter insert. - Gearmotor for stroke and belt drive, 0.63 kW - Needle carrier speed: 32/64 strokes per minute - No tools needed to remove conveyor unit, with rugged, food-safe plastic-link belt, 250 mm wide - Belt advance: 15-45 mm, mechanically adjustable in 6 steps - Passing width: 270 mm - Passing height: 200 mm - Standard voltage: 400V/50Hz/3Ph
Detail : CPMDE124 - Dimension L x P x H : 1200 x 900 x 900 - Vessel : 1 - Vessel capacity: 242 lt. - Basket capacity: 24/30 kg. - Gas power rating: 45 Kw - Elect connection: 230/50 V/Hz AC – 1N + PE - Steam Consumption: 60 Kg/h - Elect connection: 230/50 V/Hz AC – 1N + PE - Elect connection: 400/50 V/Hz 3N+PE AC - Elect power rating: 27,5 Kw Feature: - Extremely easy to learn and to use. - Difference models with 1 or 2 pans and independent basket. - Guarantees fast and safe operating cycles, constant product quality. - Control system to assure that the machine stops if without water. - Steam is controlled by a pressure switch, safety value and pressure gauge, thermostatic value. - Grants the automatic filling of the vessel and the maintaining of the necessary level of water for continuous cycles of cooking. - Standardly prepared to be connected with the PC for the HACCP control.
Specifications Series 200l T2M-R Series 200l STL Bowl capacity 200 approx.l Knife shaft motor 90 kW Knife shaft speed forwards 50-4400 Mix cycle speed forwards and reverse 90/180 rpm Bowl speed infinitely variable 5-18 rpm Electrical connection 400V, 50Hz, 3 phase + PE Net weight 200l VCM 5000 approx.kg Vacuum pump unit 4kW 1600 cbm/h Bowl capacity 200 approx.l Knife shaft moter 90 kW Knife shaft speed forwards 50-4400 rpm MIx cycle speed forwards and reverse 50-500 rpm Bowl speed infinitely variable 5-18 rpm Electrical connection 400V, 50Hz, 3 phase + PE Net weight 200l VCM 5000 approx.kg Vacuum pump unit 4kW 160 cbm/h Feature Series 200l T2M-R & 200l STL The CUTMIX series features a sturdy,tor-sion-resistant grey cast iron base with a cast-on bearing arm for the knife shaft. The smooth surfaces without lines and corners are easily cleaned. All parts that come in contact with product to be processed are made of stainless steel. With just a few flicks of the wrist the cutter head disk is disassembled to change the knives. This system significantly helps to improve.hygiene. Keeping the distance from the tip of knives to the bowl'swall to minimum positively affect the end product The WMK cutter head runs quietly and virtually vibration-free even at high speeds Different shapes of knives are available for the various application areas
Specifications Series 200l T2M-R Series 200l STL Bowl capacity 200 approx.l Knife shaft motor 48/66 kW Knife shaft speed forwards 1500/3000 rpm Mix cycle speed forwards and reverse 90/180 rpm Bowl speed 2-speed 9/18 rpm Electrical connection 400V, 50Hz, 3 phase + PE Net weight 200l CUTMIX 3850 approx.kg Bowl capacity 200 approx.l Knife shaft motor 90 kW Knife shaft speed forwards 50-4400 rpm Mix cycle speed forwards and reverse 50-500 rpm Bowl speed 2-speed 9/18 rpm Electrical connection 400V, 50Hz, 3 phase + PE Net weight 200l CUTMIX 3850 approx.kg Feature Series 200l T2M-R & 200l STL The CUTMIX series features sturdy, torsion -resistant grey cast iron base with a cast on bearing arm for the knife shaft. The smooth surfaces without line and corers are easily cleaned. All parts that come in contact with product to be processed are made of stainless steel. With just a few flicks of the wrist the cuuter head disk is disassembled to change the knives. This system significantly helps to improve, hygiene. Keeping the distance from the tip of knives to the bowl's wall to minimum positively affect the end product
Specifications Series 90 T2M-R Series 90 STL Power main moter 25/32 kw Knife shaft 1500/3000 rpm Mixing 75/150 rpm Fuse rating 80 Amps. Power main moter 32 kw Knife shaft 40/5000 rpm Mixing 40-500 rpm Fuse rating 80 Amps. Feature Series 90 T2M-R & 90 STL The basis of the CUTMIX is solid housing with intergral knife shaft bearing arm of cast iron The smooth stainless-steel outer serfaces can be clened easily and quickly All parts which come into contact with foodstuffs are made of stainless steel materals. The solid bearing of the shft, including the sealing, ensure a trouble-free opertion, even at maximum speed. The outer edge of the bowl is raised. Even liquid products will not spill over the edge. The CUTMIXERS are operation through a clear, and easy to clenn touch sensitive key-board The digital display indicates the knife speed, temperature of product, number of bowl turns, and the cutting time
Specification: - weight: ca. 270 kg - voltage: 230V 50-60 Hz - power: 1.8 kW - power consumption: 7.8 A - knife rotation: 195-825 rpm - conveyer speed: min 1.72 rpm max 15.7 rpm - กำลังการผลิตขึ้นอยู่กับประเภทวัตถุดิบและขนาดที่ต้องการ
Detail : - Direction of cuts : Vertical - Diameter of circular blades (MM) : 200 - Maximum pprocessing height(MM) : 70(40) - Cutting width (processing width) (mm) : 300 - Infeed conveyor (mm) : 850x425 - Output conveyor (mm) : 650x425 (option) - Cutting speed (m/min) : 18 (other cutting speeds upon request) - Electrical consumption (kW) : 1.1 - Electrical connection : 3 AC - 400V – 50 Hz(other voltages upon request) - Overall dimension BxHxT (mm) : 700x1190x1720 - Weight (kg) : 220 (with circular blade distance 8 mm and diameter of blades 20 mm) , (with optional output conveyor) Feature: The Nock Compact Slicers with a 300 mm cutting width and maximum processing height of 70 mm are sufficient for some applications. They are particularly compact and reasonably-priced; especially if they are not equipped with an output conveyor.
Detail: - Direction of cuts : Vertical - Diameter of circular blades (MM) : 200/300 - Maximum pprocessing height(MM) : 70/120 - Cutting width (processing width) (mm) : 400 - Infeed conveyor (mm) : 1170x490 - Output conveyor (mm) : 1170x490 - Cutting speed (m/min) : 18 (other cutting speeds upon request) - Electrial consumption (kW) : 1.5 - Electrical connection : 3 AC - 400V – 50 Hz(other voltages upon request) - Overall dimension BxHxT (mm) : 820x1300x2450 - Weight (kg) : 260 (with circular blade distance 8 mm and diameter of blades 20 mm) Feature: The Cortex CB495/5K SLICER 200 with 200 mm blades is the top-selling NOCK circular blade cutting machine with years. The machine is very often used with a blade distance of 12 – 18 mm to cut huge quantities of escalope or steaks where a throughput of more than 5 tons per hour can be achieved. Within minutes it can be re-equipped to cut strips with a second blade shaft.
Detail: - Weight : 260 kg - Water connection : 3/4 - Capacity : up to 3000 kg/h e.g. carrots 5x5 mm : 1000 kg/h 15x15 mm : 2000 kg/h 20x20 mm : 3000 kg/h - Max product width : 90 mm - Max product length : 220 mm - Max product diam. Chute pipe: 150 mm - Total power : 1.1 kW - Voltage : 230 VN/PE - Frequency : 50/60 Hz Feature: 1. Wide range of cutting inserts also for non-standard requirements - grooved knife ,steplessly adjustable from 2 to 20 mm (slice cut) - circular knives spindle (with scraper) available in 2,3,5,6,7.5,9,10,12,15,20,30 mm (strip cut) - cross cut spindle, available in 3,5,7.5,10,12,15,20,40 mm (cube cut)" 2. Useful holder for cutting accessories and tools 3. Adjustable product infeed for long-shaped products 4. Feeding hopper - for easier loading of the KUJ V with product out of baskets of crates. The removable loading funnel allows loading of the KUJ V from both sides and from the back"
Specifications Series F200 Series F222 Contents of the hopper: 250 ltrs Maximum filling power: 4.800 kg/h Maximum filling pressure: 40/50 bar Size of the filling chamber: 82g Number of wings (standard) : 14 Portioning range: 5-100 Contents of the hopper: 250 ltrs Max.filling power: 6.200 kg/h Filling pressure upto: 60 bar Contents of the filling chamber: 76 gr Number of rotor wings (standard) : 16 Portioning range: 5-10 Feature Series F200 & F222 ได้รับการออกแบบอย่างดี สามารถใช้งานได้ง่าย คงทน ยาวนาน สามารถอัดผลิตภัณฑ์เป็นแบบตรง แบบท่อน และตีเกลียวได้ เหมาะกับผลิตภัณฑ์ที่ต้องการความแม่นยำของน้ำหนักและใช้แรงอัดสูง หน้าจอแบบสัมผัส
Specifications Contents of the hopper: 160 ltrs Maximum filling power: 3.600 kg/h Maximum filling pressure: 40/50 bar Capacity of the filling chamber: 82g Number of wings (standard) : 14 Feature ได้รับการออกแบบอย่างดี สามารถใช้งานได้ง่าย คงทน ยาวนาน สามารถอัดผลิตภัณฑ์เป็นแบบตรง แบบท่อน และตีเกลียวได้ เหมาะกับผลิตภัณฑ์ที่ต้องการความแม่นยำของน้ำหนักและใช้แรงอัดสูง หน้าจอแบบสัมผัส
Specifications Contents of the hopper: 25/100 ltrs Maximum filling power: 3.600 kg/h Maximum filling pressure: 40/50 bar Capacity of the filling chamber: 82g Number of wings (standard) : 14 Feature ได้รับการออกแบบอย่างดี สามารถใช้งานได้ง่าย คงทน ยาวนาน สามารถอัดผลิตภัณฑ์เป็นแบบตรง แบบท่อน และตีเกลียวได้ เหมาะกับผลิตภัณฑ์ที่ต้องการความแม่นยำของน้ำหนักและใช้แรงอัดสูง หน้าจอแบบสัมผัส
Specification Series VV-3-450-K Series VV-4-700-K Drum Volume 1000Lt./litres Max.capacity 450 kg Pump 40 m3 Drum drive 0.55-1.8 kw Voltage 400/50 V/Hz Overall width 1216 mm Overall depth 1610 mm Height 1778 mm Drum diameter 1200 mm Net weight 505 kg Drum volume 1500 Lt./litres Max.capacity 700 kg Pump 63 m3 Drum drive 0.55-1.8 kw Voltage 400/50 V/Hz Overall width 1216 mm Overall depth 2070 mm Height 1778 mm Drum diameter 1200 mm Net weight 605 kg Feature Series VV-3-450-K & VV-4-700-K Advanced meat processing machine in rugged stainless steel contruction for commercail and processors Ideal for massaging of cooked cured products, salt impregnation and braising and in-depth salting of dry cured products; dry salting, seasoning and marinating, game and goulash; mixing of salade, dressings and sauces; tenderising of fresh meats; salting, seasoning and processing of fish and seafood products Horizontally rotating drum with 3-point support on solid frame Double-jacketed drum with integrated glycol cooling circuit Circular lid with eccentric lock and snorkel tube Frontend loading and discharge Loads alternatively manually or with pnenumatic loading device Automatic discharge by shifting from forward to reverse Large-dimentioned quick-closing water separator protects vacuum pump Powerful, frenquency-regulated, 7-speed moter with V-belt drive
Specification: - Cutting width: 430 - Cutting effec: 19 m/min - Motor power 0.75 kW 3 phases 230/400 V 50(60) Hz - Water consumption: appox. 50 l/h - Weight 150 kg - Dimension: W 820 x D 960 x H 650 mm
Detail : C420 - cutting width : 430/mm - cutting speed : 19 m/min - blade gap : 0-4.5/mm - overall dimension W x H x D : 700 x 420 x 500mm - weight : 70 kg - motor performance : 0.75 / kW - electrical connection : 3 AC * 400V – 50 Hz² Feature: C420 - Tooth roller with scraper comb
Detail: CB496 - cutting width : 430/mm - cutting speed : 24 m/min - maximum throughput height : 90/mm - blade gap : 0-5/mm - apply length on infeed conveyor : 400/mm - overall dimension W x H x D : 800 x 1190 x 1860/1210 / mm - infeed conveyor : 850x425 / mm - output conveyor : 850x425 / mm - weight : 240/220¹ / kg - motor performance : 0.75 / kW - electrical connection : 3 AC * 400V – 50 Hz² Feature: CB496 - Pressure roller : spring-suspended & adjustable in height - Open top (manual) operation possible - Output conveyor (optional) - Tooth roller with scraper comb - NOCK POWER PLATES - NOCK EASY-FLOW safety cover - Lockable castors
Detail: - Cutting width(mm) : 430 - Cutting speed (m/min) : 37 - Compressed air consumption : approx.250 l/min (ambient pressure) - Motor performance (kW) : 0.75 - Weight ( kg) : 150 - Overall dimension WxHxD (mm) : 750x970x700 - Blade dimension (mm) : 445x20x1 Feature: - Dynamic (counter rotating) stainless steel cleaning roller : Standard - NOCK Air Jet compressed air cleaning system : Standard - Spring suspended blade holder : Standard - Lockable castors : Standard - NOCK POWER PLATES : Standard
Detail: - Capacity of the filling hopper: 60/90 liters - Maximum filling performance: 2.900 kg/h - Filling pressure up to max: 40 bar - Capacity of the chambers: 82 g - Number of wings: 8 - Voltage/Tension: 400V/50Hz - Total connected load max: 4,20 Kw - Suction power of the vacuum pump: 16 cbm/h - Machine weight(net): 400 kg - Portioning speed max: 500 port/min Feature: - F60 has a servo drive with positioning regulation and offers highest portioning exactness and performance in this class.
Detail: - Capacity of the filling hopper: 160 liters - Maximum filling performance: 3.600 kg/h - Filling pressure up to max: 40 bar - Capacity of the chambers: 82 g - Number of wings: 14 - Voltage/Tension: 400V/50Hz - Total connected load max: 10,5 Kw - Suction power of the vacuum pump: 21 cbm/h - Machine weight(net): 885 kg - Portioning speed max: 600 port/min Feature: - Suitable for the production of small calibers with high pressure. - Productions with attachments demanding high conveying capacity.
Detail: - Capacity of the filling hopper: 250 liters - Maximum filling performance: 3.600 kg/h - Filling pressure up to max: 40 bar - Capacity of the chambers: 82 g - Number of wings: 14 - Voltage/Tension: 400V/50Hz - Total connected load max: 10,5 Kw - Suction power of the vacuum pump: 21 cbm/h - Machine weight(net): 925 kg - Portioning speed max: 600 port/min Feature: - Productions with high demands on the exactness of portions and the quality. - Production of raw sausages with the grinding head system WK130.
Vacuum tumblers Detail: Series VV-4-700-K - Drum volume 1500 Lt./litres - Max. capacity 700 kg - Pump 63 m3 - Drum drive 0.55-1.8 kw - Voltage 400/50 V/Hz - Overall width 1216 mm - Overall depth 2070 mm - Height 1778 mm - Drum diameter 1200 mm - Net weight 605 kg Feature: Series VV-3-450-K - Advanced meat processing machine in rugged stainless steel construction for commercial and Processors - Ideal for massaging of cooked cured products, salt impregnation and braising and in-depth salting of dry cured products; dry salting, seasoning and marinating, game and goulash; mixing of salad dressings and sauces; tenderizing of fresh meats; salting, seasoning and processing of fish and seafood products Horizontally rotating drum with 3-point support on solid frame - Double-jacketed drum with integrated glycol cooling circuit - Circular lid with eccentric lock and snorkel tube - Frontend loading and discharge - Loads alternatively manually or with pneumatic loading device - Automatic discharge by shifting from forward to reverse - Large-dimentioned quick-closing water separator protects vacuum pump - Powerful, frequency-regulated, 7-speed motor with V-belt drive
Detail: - Chamber base: 143 x 129 cm - Chamber height (electrical): 259 cm - Room height required (electrical): 359 cm - Trolley size ( W x D x H ): 100 x 100 x 200 cm - Trolley stick length: 100 cm - Electrical heating: 36 KW - Model: GR12 - External dimensions ( W x D x H ): 54 x 60 x 259 cm - Power consumption: 1.6 KW - Sawdust size: 0-3 mm - Power consumption without heating: 7.7 KW Feature: - Strong construction - Emergency opening - Piping - Automatic cleaning system - Ventilators - Hinges - Automatic door opening - Floor - Open and closed smoking
Detail: - Chamber base: 143 x 129 cm - Chamber height (Steam): 259 cm - Room height required (Steam): 359 cm - Trolley size ( W x D x H ): 100 x 100 x 200 cm - Trolley stick length: 100 cm - Steam heating: 40 KW - Model: GR12 - External dimensions ( W x D x H ): 54 x 60 x 259 cm - Power consumption: 1.6 KW - Sawdust size: 0-3 mm - Power consumption without heating: 7.7 KW - Low pressure steam consumption: 40 kg/h - High pressure steam consumption: 50 kg/h Feature: - Strong construction - Emergency opening - Piping - Automatic cleaning system - Ventilators - Hinges - Automatic door opening - Floor - Open and closed smoking
Detail : - Capacity of the filling hopper: 25/90 liters - Maximum filling performance: 3.600 kg/h - Filling pressure up to max: 40 bar - Capacity of the chambers: 82 g - Number of wings: 14 - Voltage/Tension: 400V/50Hz - Total connected load max: 9,5 KW - Suction power of the vacuum pump: 21 cbm/h - Machine weight(net): 650 kg - Portioning speed max: 600 port/min Feature: - Suitable for the production of small calibers with high pressure. - Productions with attachments demanding high conveying capacity.
Detail: - Basket volume: 44 l - Infeed / feeding height : 583 mm - Speed : 325-1050 r/min - Voltage : 1~230 V N/PE, 50-60Hz, 2~230V N/PE, 50-60 Hz - Total power: 0,8 kW - Width x length x height : 644x954x985 mm - Weight: 160 kg. Feature: - Settings of individually adjustable spin speeds and freely adjustable spin times.
Detail: - Tipping angle: 30/120 - Max load: 350 kg including bin - Lifting speed: 5m/min - Motor: 0,75 kW, 3x400 V + PE, 50 Hz - Ampere rating: 2,0 A - Control voltage: 24 V - Protection: IP65 - Entirely made of stainless steel AISI 304 - Glass blasted surface Feature: - lifting and tipping of 200 Euro bins. - Tipping height can easily be adjusted with 100 mm steps. - including electrical control. - With mechanical antifall security system - For tipping height of 1700 – 2200 mm.
Detail: - Weight of machine: Approx 23 kg. - Tray length-max length: 360 mm - Trey width- max length: 280 mm - Power supply: Air - Air consumption: 300L (120 trey/min) - Air pressure: 7 Bar - Operational temperature: 32F -95F / 0C – 60C - Stock temperature: 14F – 140F / -10C – 60C - Humidity: 10% - 90% - Noise level: <70 dB (A) - Steel quality: AISI 304 Feature: - Max capacity is up to 120+ trays per minute – depending on trey shape and size. - Easily integrated into existing production/packing lines. - Pneumatic driven - Compact size - One-minute, tool free changeover - Max tray size is 280 x 360 mm - Few moving parts Low maintenance costs - Hygienic design - Short return of investment
Specifications Temperatur range: 2-90 c Dosing ranges: Total range: 110-2,000 ccm per cycle and dosing position Dosing capacity: max .30-60 cycles/min/position,depending on product and dosing volume. Dosing position: 1-2 Dosing principle: Volumemetric Volume adjustment: manual or servodriven Feature Application: non-pumpable and sticky product like cooked rice,pasta,vegetables,mix fruit,seafood mixtures,ready meal and cup Line combination: Traysealers (single and multiple lanes) , thermoformers,pouch,packaging machines and flowwrappers,cartoning machines and conveyorlines for jars,can,bucket and cup. Synchronisation: interface with packaging lines,line control,interface with checkweighers,tendency control.
Detail: - Temperature: 2 – 90C - Range: entire range 60-6,600 cc - Performance: max. 20-45 cycles/min/dosing - System: dosing cylinders with rotary valve system, very easy to dismantle and clean. - Drive: Pneumatic, 1 x central drives for all dosing positions, individual drives for each dosing position available - User interface: function switches. Feature: - The compact and mobile equipment can be used for a variety of applications in commercial kitchens and industrial food production. As a real all-rounder this series features easy handing, quick cleaning and customized performance ranges from 20 to 240 deposits/minute.
Detail: - Cutting width 430 mm - Cutting performance 19 m/min - Blade gap(stepless) 0-0.5 mm - Maximum throughput height - mm - Overall measurements WxHxD 750x420x500 (700x950x600 with underframe) mm - Weight 80 kg (95 kg with underframe) - Motor performance 0.75 kW - Electrical connection 3 AC – 400 V – 50 Hz¹ (other voltages available upon request) - Approx. water connection 80 l/h Feature: - Open top table machine - Underframe (Optional) - Skinning technology : CF (tooth roller with scraper comb) - Skinning modes : Silver skinning, thin (shallow) skinning, deep skinning(restricted) - Stainless steel
Detail: - Cutting width 430 mm - Cutting performance 19 m/min - Blade gap(stepless) 0-0.5 mm - Maximum throughput height - mm - Overall measurements WxHxD 750x960x750 mm - Weight 150 kg - Motor performance 0.75 kW - Electrical connection 3 AC – 400 V – 50 Hz¹ (other voltages available upon request) - Approx. water connection 100 l/h Feature: - Open top stand machine - Skinning technology : CF (tooth roller with scraper comb) - Skinning modes : Silver skinning, thin (shallow) skinning, deep skinning(restricted) - Blade holder spring suspended : Standard - NOCK POWER PLATES - Lockable castors Stainless steel
Detail: - Cutting width 430 mm - Cutting performance 24 m/min - Blade gap(stepless) 0-5 mm - Maximum throughput height 70 mm - Overall measurements WxHxD 800x1190x1860 mm - Weight 240 kg - Motor performance 0.75 kW - Electrical connection 3 AC – 400 V – 50 Hz¹ (other voltages available upon request) - Approx. water connection 200 l/h Feature: - Automatic machine with infeed and output conveyor - Skinning technology : CF (tooth roller with scraper comb) - Skinning modes : Silver skinning, thin (shallow) skinning, deep skinning - Blade holder spring suspended : Standard - NOCK POWER PLATES - NOCK EASY-FLOW safety cover - Lockable castors - Stainless steel
Detail: S420 - Cutting width 430 mm - Cutting performance 24 m/min - Blade gap(stepless) 0-0.5 mm - Maximum throughput height - mm - Overall measurements WxHxD 750x420x500 (700x950x600 with underframe) mm - Weight 80 kg (95 kg with underframe) - Motor performance 0.75 kW - Electrical connection 3 AC – 400 V – 50 Hz¹ (other voltages available upon request) - Approx. water connection 80 l/h Feature: S420 - Open top table machine - Underframe (Optional) - Skinning technology : S (transport roller without grooves, with counter-rotating cleaning Roller) - Skinning modes : Silver skinning, thin (shallow) skinning, deep skinning(restricted) - Stainless steel
Detail : S460 - Cutting width 430 mm - Cutting performance 29 m/min - Blade gap (stepless) 0-0.5 mm - Maximum throughput height - mm - Overall measurements WxHxD 750x960x750 mm - Weight 160 kg (with underframe) - Motor performance 0.75 kW - Electrical connection 3 AC – 400 V – 50 Hz¹ (other voltages available upon request) - Approx. water connection 100 l/h Feature : S460 - Open top stand machine - Skinning technology : S (transport roller without grooves, with counter-rotating cleaning Roller) - Skinning modes : Silver skinning, thin (shallow) skinning, deep skinning(restricted) - Blade holder spring suspended : Standard - NOCK POWER PLATES - Lockable castors - Stainless steel
Detail : SB496 - Cutting width 430 mm - Cutting performance 24 m/min - Blade gap(stepless) 0-5 mm - Maximum throughput height 70 mm - Overall measurements WxHxD 800x1190x1860 mm - Weight 240 kg - Motor performance 0.75 kW - Electrical connection 3 AC – 400 V – 50 Hz¹ (other voltages available upon request) - Approx. water connection 200 l/h - Automatic machine with infeed and output conveyor Feature: SB496 - "Skinning technology : S (transport roller without grooves, with counter-rotating cleaning Roller) " - Skinning modes : Silver skinning, thin (shallow) skinning, deep skinning - Blade holder spring suspended : Standard - NOCK POWER PLATES - NOCK EASY-FLOW safety cover - Lockable castors - Stainless steel
Detail: - Direction of cuts : Vertical - Diameter of circular blades (MM) : 200 - Maximum pprocessing height(MM) : 70(40) - Cutting width (processing width) (mm) : 300 - Infeed conveyor (mm) : 850x425 - Output conveyor (mm) : 650x425 (option) - Cutting speed (m/min) : 18 (other cutting speeds upon request) - Electrical consumption (kW) : 1.1 - Electrical connection : 3 AC - 400V – 50 Hz(other voltages upon request) - Overall dimension BxHxT (mm) : 700x1190x1720 - Weight (kg) : 220 (with circular blade distance 8 mm and diameter of blades 20 mm) , (with optional output conveyor) Feature: The Nock Compact Slicers with a 300 mm cutting width and maximum processing height of 70 mm are sufficient for some applications. They are particularly compact and reasonably-priced; especially if they are not equipped with an output conveyor.
Detail: - Arch size : 320x 200 mm. - Channel width : 30/ 42/ 50/ 62/ 77/ 102 mm. - Band width : 28/ 40/ 48/ 60/ 75/ 100 mm. - Voltage : 230V/115V - Frequency : 50 HZ/60HZ - Required air pressure : 6 bar - Air consumption : max.50l./min - Power : 500 watts - Work high : 955 - Height : 1270 - Width : 600 - Base depth : 500 - Depth : 500 - Total height : 1505 - Total width : 840 - Width of external reelholder : 220 - Bundless / min : 34 Feature: - Accurately, rapidly and reliably - With a clear massage - With all required product details - Economically and environmentally friendly - With safe, damage-free seal - Cleanly, odour and smoke free - With low energy costs - With lowest operational costs
Detail: - Vacuum skin - Darfresh on tray - Vaccuum skin DD - Hybric flat 3D - Protruding vacuum skin - Super protruding vacuum skin - Flex flex protruding - Flex flex super protruding - Modified atmosphere packaging Feature: - Vertical display and space saving - Product visibility with hygienic packs - Possibility for creative communication with label or printed film. - 80% recyclable packing based on paper board form sustainable sources. - Superior shelf-life and merchandising possibilities. - Advance technology to vacuum skin large joints of fresh meat. -Innovative pre cut system for reduction in packaging. - Mondini technology is industry leader
Detail: - Cryovac Mirabella - Protrusion map - Stretch seal - Map rigid lid - Blow molded jars Feature: - Display fresh meat in a modern format. - Secure material technology with shrink films. - Pack fill with product protrusion highlight quality and value. - New option for product presentation whilst delivering benefits of MAP. - Modern package for glass and tin can replacement.
Detail: - Simple to operate, easy to clean - Only seconds needed to change the cutting devices - 3 cutting devices available. - core 25 mm, peel 84 mm, max 150 mm, (Standard) - core 25 mm, peel 74 mm, max 150 mm, (Optional) - core 25 mm, peel 102 mm, max 150 mm, (Optional) - Footprint : 270x420 mm Feature: - Pineapple peeling and coring (Table top)
Detail: - Length : 2817 mm - Width : 1389 mm - Height : 1675 mm - Infeed / feeding height : 1232 mm - Discharge / outfeed height : 933 mm - Total power : 3.6 kW - Voltage : 3~400 VN/PE - Frequency : 50 Hz - Total volume : 606 l - Water discharge : 2x 2" - Fresh water connection : 2x 3/4 (GEKA) - Weight : 450 kg Feature: - Water attached to the wet product is partially eliminated through vibration and returns directly to the machine water circulation. This accelerates and simplifies product drying. - Depending on product, if the vibrating plate perforation has adequate hole sizes, vibration discharge can be used to product pre classification. This way, smaller particles that can fall through the holes are separated, allowing a better end product quality. Some sorting procedures could be simplified.
Detail: - Length : 4209 mm - Width : 1388 mm - Height : 1675 mm - Infeed / feeding height : 1232 mm - Discharge / outfeed height : 759 mm - Total power : 7.7 kW - Voltage : 3~400 VN/PE - Frequency : 50 Hz - Total volume : 814 l - Water discharge : 2x 2" - Fresh water connection : 2x 3/4 (GEKA) - Weight : 590 kg Feature: - Extremely delicate products or big leaves will be neatly discharged from the washing machines through a hygienically conceived belt conveyor with a stainless steel drum motor drive. Air knives are strategically placed on top and below the conveyor belt discharge to separate the product completely from the belt. Air knives are provided with air by an integrated blowing device. For cleaning, all side guides can be tool less and quickly removed. The belt can be released by simply tilting up the drum motor. This open structure of the conveyor frame makes cleaning quick and easy.
Detail: - Basket volume: 44 l - Infeed / feeding height : 583 mm - Speed : 325-1050 r/min - Voltage : 1~230 V N/PE, 50-60Hz, 2~230V N/PE, 50-60 Hz - Total power: 0,8 kW - Width x length x height : 644x954x985 mm - Weight: 160 kg. Feature: - Settings of individually adjustable spin speeds and freely adjustable spin times.
Detail: - Length : 1701 mm - Width : 670 mm - Height : 1271 mm - Weight : 235 kg - Infeed / feeding height : 777 mm - Discharge / outfeed height : 470 mm - Belt width : 125 mm - Height of downholder : 130 mm - conveyor speed : 2,2 - 16,4 m/min - Knife rotation speed : 105-795 r/min - Theoretical cutting thickness : 1 -130 mm - Total power : 1.8 kW - Voltage : 230 VN/PE - Frequency : 50/60 Hz Feature: - Sloping surface - Modern hygienic design - Knife box with optimized ejection (products Remain undamaged during unloading process) - Completely redesigned down holder - New Safety interlock system on knife box
Detail: - Power: 1.12 kW - Voltage: 400V / 50 Hz - Capacity: 400 kg/h - Dimension: W 705 x L 815 x H 1285 mm Feature: - Abrasive peeling - Adapted to hard product, only to peel - Knife peeling model available on request (PS 25 S) - All stainless steel construction, double sealed, lifetime bearing.
Detail: - Power: 1.52 kW - Voltage: 400V / 50 Hz - Capacity: 600 kg/h - Dimension: W 910 x L 930 x H 1395 mm Feature: - Abrasive peeling - Adapted to hard product, only to peel - Knife peeling model available on request (PS 25 S) - All stainless steel construction, double sealed, lifetime bearing.
Detail : - Power: 8 kW - Base heat temp: 20-200 Degree Celsius - Side wall temp: 50-130 Degree Celsius - Voltage: 380 V, 500 Hz - Mixing speed: 6-20 rpm - Tank diameter: 450 mm - Tank depth: 235 mm - Capacity: 30 liters - Dimension: W 880 x D 766 x H 970 mm Feature: - Heating by mean of armored elements in INCOLOY-800 alloy controlled by electronic board. - Temperature control by system with 2 probes (product/bottom) - Automatic mixing device with three arms and PEEK scrapers, complete with vertical blade according to the product to be processed. - Electronic control by means of multifunctional keyboard with touch screen 7 with easy and clear massages. - USB connection to update software and load cooking programs
Detail: - Power: 17 kW - Voltage: 380-415V, 50/60 Hz - Tank diameter: 805 mm - Tank depth: 650 mm - Useful capacity: 110 liters - Dimension: W 1470 x D 1125 x H 1285 mm Feature: - Times andautomatic control of the baskets lifting. - Up to 8 different cooking settings. - Electronic control by means of multifunctional keyboard with touch screen 7 with easy and clear massages. - USB connection to update software and load cooking programs
Detail: - Power: 36 kW - Voltage: 380-415V, 50/60 Hz - Tank diameter: 900 mm - Tank depth: 780 mm - Useful capacity: 455 liters - Dimension: W 1130 x D 1340 x H 1050 mm Feature: - Basket inserts are also available - Control panel will be electronic which can program cooking temperature and time.
ผลิตภัณฑ์เด่น
Detail: - Arch size : 320x 200 mm. - Channel width : 30/ 42/ 50/ 62/ 77/ 102 mm. - Band width : 28/ 40/ 48/ 60/ 75/ 100 mm. - Voltage : 230V/115V - Frequency : 50 HZ/60HZ - Required air pressure : 6 bar - Air consumption : max.50l./min - Power : 500 watts - Work high : 955 - Height : 1270 - Width : 600 - Base depth : 500 - Depth : 500 - Total height : 1505 - Total width : 840 - Width of external reelholder : 220 - Bundless / min : 34 Feature: - Accurately, rapidly and reliably - With a clear massage - With all required product details - Economically and environmentally friendly - With safe, damage-free seal - Cleanly, odour and smoke free - With low energy costs - With lowest operational costs
Detail : - Power: 8 kW - Base heat temp: 20-200 Degree Celsius - Side wall temp: 50-130 Degree Celsius - Voltage: 380 V, 500 Hz - Mixing speed: 6-20 rpm - Tank diameter: 450 mm - Tank depth: 235 mm - Capacity: 30 liters - Dimension: W 880 x D 766 x H 970 mm Feature: - Heating by mean of armored elements in INCOLOY-800 alloy controlled by electronic board. - Temperature control by system with 2 probes (product/bottom) - Automatic mixing device with three arms and PEEK scrapers, complete with vertical blade according to the product to be processed. - Electronic control by means of multifunctional keyboard with touch screen 7 with easy and clear massages. - USB connection to update software and load cooking programs
Detail: - Simple to operate, easy to clean - Only seconds needed to change the cutting devices - 3 cutting devices available. - core 25 mm, peel 84 mm, max 150 mm, (Standard) - core 25 mm, peel 74 mm, max 150 mm, (Optional) - core 25 mm, peel 102 mm, max 150 mm, (Optional) - Footprint : 270x420 mm Feature: - Pineapple peeling and coring (Table top)
Specification: - weight: ca. 270 kg - voltage: 230V 50-60 Hz - power: 1.8 kW - power consumption: 7.8 A - knife rotation: 195-825 rpm - conveyer speed: min 1.72 rpm max 15.7 rpm - กำลังการผลิตขึ้นอยู่กับประเภทวัตถุดิบและขนาดที่ต้องการ
Detail: - Length : 2817 mm - Width : 1389 mm - Height : 1675 mm - Infeed / feeding height : 1232 mm - Discharge / outfeed height : 933 mm - Total power : 3.6 kW - Voltage : 3~400 VN/PE - Frequency : 50 Hz - Total volume : 606 l - Water discharge : 2x 2" - Fresh water connection : 2x 3/4 (GEKA) - Weight : 450 kg Feature: - Water attached to the wet product is partially eliminated through vibration and returns directly to the machine water circulation. This accelerates and simplifies product drying. - Depending on product, if the vibrating plate perforation has adequate hole sizes, vibration discharge can be used to product pre classification. This way, smaller particles that can fall through the holes are separated, allowing a better end product quality. Some sorting procedures could be simplified.
Detail: - Basket volume: 44 l - Infeed / feeding height : 583 mm - Speed : 325-1050 r/min - Voltage : 1~230 V N/PE, 50-60Hz, 2~230V N/PE, 50-60 Hz - Total power: 0,8 kW - Width x length x height : 644x954x985 mm - Weight: 160 kg. Feature: - Settings of individually adjustable spin speeds and freely adjustable spin times.
Detail: - Direction of cuts : Vertical - Diameter of circular blades (MM) : 200/300 - Maximum pprocessing height(MM) : 70/120 - Cutting width (processing width) (mm) : 400 - Infeed conveyor (mm) : 1170x490 - Output conveyor (mm) : 1170x490 - Cutting speed (m/min) : 18 (other cutting speeds upon request) - Electrial consumption (kW) : 1.5 - Electrical connection : 3 AC - 400V – 50 Hz(other voltages upon request) - Overall dimension BxHxT (mm) : 820x1300x2450 - Weight (kg) : 260 (with circular blade distance 8 mm and diameter of blades 20 mm) Feature: The Cortex CB495/5K SLICER 200 with 200 mm blades is the top-selling NOCK circular blade cutting machine with years. The machine is very often used with a blade distance of 12 – 18 mm to cut huge quantities of escalope or steaks where a throughput of more than 5 tons per hour can be achieved. Within minutes it can be re-equipped to cut strips with a second blade shaft.
Specifications Series F200 Series F222 Contents of the hopper: 250 ltrs Maximum filling power: 4.800 kg/h Maximum filling pressure: 40/50 bar Size of the filling chamber: 82g Number of wings (standard) : 14 Portioning range: 5-100 Contents of the hopper: 250 ltrs Max.filling power: 6.200 kg/h Filling pressure upto: 60 bar Contents of the filling chamber: 76 gr Number of rotor wings (standard) : 16 Portioning range: 5-10 Feature Series F200 & F222 ได้รับการออกแบบอย่างดี สามารถใช้งานได้ง่าย คงทน ยาวนาน สามารถอัดผลิตภัณฑ์เป็นแบบตรง แบบท่อน และตีเกลียวได้ เหมาะกับผลิตภัณฑ์ที่ต้องการความแม่นยำของน้ำหนักและใช้แรงอัดสูง หน้าจอแบบสัมผัส
Detail : - Capacity of the filling hopper: 25/90 liters - Maximum filling performance: 3.600 kg/h - Filling pressure up to max: 40 bar - Capacity of the chambers: 82 g - Number of wings: 14 - Voltage/Tension: 400V/50Hz - Total connected load max: 9,5 KW - Suction power of the vacuum pump: 21 cbm/h - Machine weight(net): 650 kg - Portioning speed max: 600 port/min Feature: - Suitable for the production of small calibers with high pressure. - Productions with attachments demanding high conveying capacity.
Detail : - Direction of cuts : Vertical - Diameter of circular blades (MM) : 200 - Maximum pprocessing height(MM) : 70(40) - Cutting width (processing width) (mm) : 300 - Infeed conveyor (mm) : 850x425 - Output conveyor (mm) : 650x425 (option) - Cutting speed (m/min) : 18 (other cutting speeds upon request) - Electrical consumption (kW) : 1.1 - Electrical connection : 3 AC - 400V – 50 Hz(other voltages upon request) - Overall dimension BxHxT (mm) : 700x1190x1720 - Weight (kg) : 220 (with circular blade distance 8 mm and diameter of blades 20 mm) , (with optional output conveyor) Feature: The Nock Compact Slicers with a 300 mm cutting width and maximum processing height of 70 mm are sufficient for some applications. They are particularly compact and reasonably-priced; especially if they are not equipped with an output conveyor.